2024 New-LAUNCH X431 CRP123i V2.0 OBD2 Scanner Car Diagnostic Tools ABS SRS Engine AT 4 System Scanner + 7 Reset Free Up

Why Choose LAUNCH X431 CRP123i V2.0

• 4 System Diagnostic for engine, transmission, ABS, airbag (SRS) systems for extracting ECU information, reading and erasing codes, turning off warning lights, and displaying real-time data streams in text or merged graphics.

• 7 Reset Service: Reset SAS+ Reset OIL+Reset Brake + RESET INJEC +BAT MATCH + ELEC.TH ROTTLE RLRN +RESET DPF
(more reset service can buy on device's MALL)

• Lifetime Free Update via WIFI

• Auto VIN Scan

• The OBD2 scanner with all 10 test modes is suitable for most OBD2/CAN cars made in 1996 and later.

• The battery voltage monitor can check the vehicle battery voltage status in real time.

• Automatically generate diagnostic reports; share via email. DTC lookup library.

• 57+ Car Brands , Over 10000+ Models , covering OBD1/OBD2/JOBD/KOBD Protocols

More ...

4 System Diagnostic -Get You Safe Journey Home.

Engine System Diagnosis

By Reading, Clearing DTCs and viewing Live Data Stream, the scan tool can help you easily pinpoint the cause of the Engine System problem and turn off the warning light related, thus ensuring the engine works properly, and enhancing its performance.

ABS System Diagnosis

By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this LAUNCH Creader scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

SRS System Diagnosis

By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

Transmission system diagnosis

By checking the Transmission system, this tool can figure the problem out via reading codes, or check the health status via Live Data viewing, and turn off the warning light, making sure that the right amount of power goes to the wheels to drive at a given speed.

7 Hot Mantenance Services

1. Oil Lamp Reset Service

perform reset for a new calculation of Engine Oil Life system once changed the oil.

2. SAS Steering Angel Sensor Reset

Reset the steering angle to zero to keep the car running straight.

3. Electronic Throttle Position Reset

enables you to make initial settings to throttle actuators and returns the learned values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake

4. BMS Reset/ Battery matching

This function enables you to perform a resetting operation on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and the battery matching will be done.

5. DPF Reset

This function enables you to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high-temperature heating combustion, fu-el additive or catalyst reduce PM ignition combustion) to stabilize the filter.

6. Injector Coding

This function enables you to write the in-jector actual code or rewrite code in the ECU to the in-jector code of the corresponding cylinder, so as to more accurately control or correct cylinder injection quantity.

7. RESET ETS/ELEC.TH ROTTLE RLRN

To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.

Live Data Stream Analyse in Graph

The launch scanner CRP123E shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

Full OBD2 Check--Make a Better Detection for Car Engine System!

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.